兼容光 ？
AFBR-811VxyZ
Description
AFBR-811VxyZ
乐天堂专业研爆发产兼容安华高AFBR-811VxyZ,Avago AFBR-811VxyZ,安华高AFBR-811VxyZ光 ？,Avago AFBR-811VxyZ光 ？,安华高AFBR-811VxyZ光纤 ？,Avago AFBR-811VxyZ光纤 ？,安华高Avago AFBR-811VxyZ光 ？,安华高Avago AFBR-811VxyZ光纤 ？ ，100%完善兼容安华高Avago AFBR-811VxyZ光 ？:电气参数兼容 ，光学参数兼容。
The AFBR-811VxyZ and AFBR-822VxyZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
Avago's MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. AFBR-812RxyZ Tx/AFBR-822RxyZ Rx is used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. AFBR-812FxyZ Tx/AFBR-822FxyZ Rx is used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.
The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch
The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM® LightTurn® connector.
The thermal interface provided can require either a user provided heat sink or use of the Avago general purpose clip on heat sink, to maintain the module case temperature to be between 0°C to 70°C during continuous operation.
MiniPOD Transmitter Part Numbers
- AFBR-811FxyZ Flat Ribbon Jumper Cable, Transmitter Base Part Number
- AFBR-821FxyZ Flat Ribbon Jumper Cable, Receiver Base Part Number
- AFBR-811RxyZ Round Jumper Cable, Transmitter Base Part Number
- AFBR-821RxyZ Round Jumper Cable, Receiver Base Part Number
Features
- Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10 and nPPI) per lane
- Compliant to 12×QDR InfiniBand
- Operates at 10.3125 Gbps per channel with 64b/66b encoded data for 100 GbE application and at 10 Gbps with 8b/10b encoded data for IB-QDR application
- High Aggregate bandwidth: 120 Gbps per module
- High density footprint: 21.95 mm × 18.62 mm size
- Two package options to optimize internal cable management and system layout
- Separate transmitter and receiver modules
- 850 nm VCSEL array in transmitter; PIN array in receiver
- Links up to 150 m at 10.3125 Gbps with OM4 4700 MHz•km 50 mm MMF
- Optical Interface: PRIZM® LightTurn® optical turn 1×12 ribbon fiber connector
- Pluggable electrical interface: 9×9 MEG-Array for ease of design and manufacturability
- Low Power consumption: 3.0 W Max per Transmitter/ Receiver pair (0°C to 70°C operating range)
- Dedicated signals for module address, module reset and host interrupt
- Two Wire Serial (TWS) interface with maskable interrupt for expanded functionality including:
- Individual channel functions: disable, squelch disable, lane polarity inversion, TX eye margin enable
- A/D read back: module temperature and supply voltages, per channel laser current and laser power, or received power
- Status: per channel Tx fault, electrical (transmitter) or optical (receiver) LOS, and alarm flags
- Programmable equalization integrated with DC blocking caps at transmitter data input
- Programmable receiver output swing and deemphasis level
- Field Upgradable Firmware capability
- 0°C to 70°C case temperature continuous operating range. 85°C supported for short durations
Important Notice
Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.
Related Products
AFBR-7QERxxZ
AFBR-7QERxxZ
乐天堂专业研爆发产兼容安华高AFBR-7QERxxZ,Avago AFBR-7QERxxZ,安华高AFBR-7QERxxZ光 ？,Avago AFBR-7QERxxZ光 ？,安华高AFBR-7QERxxZ光纤 ？,Avago AFBR-7QERxxZ光纤 ？,安华高Avago AFBR-7QERxxZ光 ？,安华高Avago AFBR-7QERxxZ光纤 ？ ，100%完善兼容安华高Avago AFBR-7QERxxZ光 ？:电气参数兼容 ，光学参数兼容。
AFBR-8CERxxZ
AFBR-8CERxxZ
乐天堂专业研爆发产兼容安华高AFBR-8CERxxZ,Avago AFBR-8CERxxZ,安华高AFBR-8CERxxZ光 ？,Avago AFBR-8CERxxZ光 ？,安华高AFBR-8CERxxZ光纤 ？,Avago AFBR-8CERxxZ光纤 ？,安华高Avago AFBR-8CERxxZ光 ？,安华高Avago AFBR-8CERxxZ光纤 ？ ，100%完善兼容安华高Avago AFBR-8CERxxZ光 ？:电气参数兼容 ，光学参数兼容。
AFBR-77D2SZ
AFBR-77D2SZ
乐天堂专业研爆发产兼容安华高AFBR-77D2SZ,Avago AFBR-77D2SZ,安华高AFBR-77D2SZ光 ？,Avago AFBR-77D2SZ光 ？,安华高AFBR-77D2SZ光纤 ？,Avago AFBR-77D2SZ光纤 ？,安华高Avago AFBR-77D2SZ光 ？,安华高Avago AFBR-77D2SZ光纤 ？ ，100%完善兼容安华高Avago AFBR-77D2SZ光 ？:电气参数兼容 ，光学参数兼容。
AFBR-78D2SZ
AFBR-78D2SZ
乐天堂专业研爆发产兼容安华高AFBR-78D2SZ,Avago AFBR-78D2SZ,安华高AFBR-78D2SZ光 ？,Avago AFBR-78D2SZ光 ？,安华高AFBR-78D2SZ光纤 ？,Avago AFBR-78D2SZ光纤 ？,安华高Avago AFBR-78D2SZ光 ？,安华高Avago AFBR-78D2SZ光纤 ？ ，100%完善兼容安华高Avago AFBR-78D2SZ光 ？:电气参数兼容 ，光学参数兼容。
AFBR-78D4SZ
AFBR-78D4SZ
乐天堂专业研爆发产兼容安华高AFBR-78D4SZ,Avago AFBR-78D4SZ,安华高AFBR-78D4SZ光 ？,Avago AFBR-78D4SZ光 ？,安华高AFBR-78D4SZ光纤 ？,Avago AFBR-78D4SZ光纤 ？,安华高Avago AFBR-78D4SZ光 ？,安华高Avago AFBR-78D4SZ光纤 ？ ，100%完善兼容安华高Avago AFBR-78D4SZ光 ？:电气参数兼容 ，光学参数兼容。
AFBR-812VxyZ
AFBR-812VxyZ
乐天堂专业研爆发产兼容安华高AFBR-812VxyZ,Avago AFBR-812VxyZ,安华高AFBR-812VxyZ光 ？,Avago AFBR-812VxyZ光 ？,安华高AFBR-812VxyZ光纤 ？,Avago AFBR-812VxyZ光纤 ？,安华高Avago AFBR-812VxyZ光 ？,安华高Avago AFBR-812VxyZ光纤 ？ ，100%完善兼容安华高Avago AFBR-812VxyZ光 ？:电气参数兼容 ，光学参数兼容。